Top > Application Examples > Mooncraft Co. Ltd.

Application Examples

Mooncraft Co. Ltd.
Leading Edge of Racecar Aerodynamics Development - Get Faster with CFD

[Vol. 1] Mooncraft is a racecar constructor and is known for its remarkable aerodynamic design. The company has been working on wind tunnel testing for more than 30 years, producing aerodynamically sophisticated racecars. The company has been always pursuing to create innovative products and has also introduced Computational Fluid Dynamics (CFD) in the early days. Mooncraft is working on analysis of vehicle internal and external flows using SC/Tetra.

Picture 1: Small-sized wind tunnel with a moving belt
Experiments can be carried out using 1/5 size model

Mooncraft is a Japanese racecar manufacturer which was founded by Takuya Yura in 1975. Mr. Yura’s workshop was opened near Fuji International Speedway and that is the origin of the company. It became publicly known after Mr. Yura appeared in an advertisement on TV. Mooncraft joined racecar industry by setting up the race team in 1985. They also brought carbon fiber composite technologies into Japanese racecar industry by introducing autoclaves, to create world-class racecar chassis and aerodynamic components.

Since the company was born, Mooncraft has been extending the field of engineering, from designing of aircraft components to chairs made from CFRP, all these technologies were obtained in the leading edge of racecar development.

Picture 2: Mr. Shinichi Sakaguchi, Development Department

Picture 3: Mr. Taisuke Shinse, Development Department

Experts in Aerodynamic Design

Mooncraft has a wealth of experience in aerodynamics. In order to meet the tight schedule of racecar development, they have introduced a dedicated wind tunnel for testing scaled models since 1986 (Picture 1). The wind tunnel is equipped with moving belt, which makes it possible to simulate the underhood flow characteristics.

Mr. Shinichi Sakaguchi from Development Department in Mooncraft (Picture 2) believes that it is essential for a racecar constructor to have their own wind tunnel and to develop aerodynamic surfaces based on experimental data. “Racecars can go up to around 300 km/h, where the effect of air resistance becomes significant. Hence, that is always important in racecar aerodynamics to reduce the drag while achieving a massive downforce on the car at the same time.” says Mr. Sakaguchi.

In recent years, CFD has been playing a more important role for its advantages to wind tunnel experiment. That is why Mooncraft has introduced SC/Tetra to work on thermo-fluid analysis. “Our strength lies in the know-how and data of wind tunnel experiments that we have cultivated for years. We want to maximize the efficiency of product development and improve our products by combining the wind tunnel experiment and CFD,” Mr. Sakaguchi says. Since 2015 where Taisuke Shinse, in charge of CFD department, joined the company, they have introduced CFD analysis into their development of GT300 class racecar (Picture 3).

Picture 4: SGT LOTUS EVORA in SUPER GT race

Application of CFD for SUPER GT300 Racecar Development

Mooncraft has been applying CFD into the development of racecars for SUPER GT300 class since 2015 (Picture 4). There is a variety of racecars competing in GT300. Some of these are developed based on commercial vehicles, and some others are entirely original.

SGT LOTUS EVORA was launched from Mooncraft back in 2015, which was developed based on a British lightweight sport car, LOTUS EVORA. While the carbon monocoque chassis is restricted to modify from the original design, the aero-devices, suspension and several other parts were developed by Mooncraft from scratch.

The development started with wind tunnel testing. Mr. Yura designed a clay model, which was then evaluated in series of experiments, in order to determine initial sizes and scales for each component. The modification to midship engine layout was conducted to improve its kinematics and it makes SGT LOTUS EVORA distinctive in SUPER GT300. However, this major modification brought them unfavorable troubles caused by engine starter especially in their first season.

SUPER GT has eight races per year in Japan and Thailand. Engineers conduct wind tunnel experiments before every race to investigate the aerodynamic characteristics. The data gained in these experiments is utilized for the setup on track and it also shortens the time for it.

SC/Tetra CFD is used simultaneously to examine the ‘local information’ such as pressure distribution, velocity vector fields, and temperature distribution, which is difficult to investigate in wind tunnel.

Analyzing External Flow and Internal Flow of a Car Body

Mr. Shinse’s first objective was to investigate the performance of rear wings. This first investigation was not that hard as the wind tunnel data had been correlated with track data. He generated rear wing models using a 3D printer to look for a suitable wing profile that achieves low drag and high downforce.

However, the CFD results were not in accordance with experiment results. Mr. Shinse asked Software Cradle for an advice and was recommended to use SST k-ω turbulence model instead of standard k-ε model to simulate flow separation. “The technical support from Software Cradle is quite useful and helps me to learn about CFD,” Mr. Shinse says.

Figure 1: Pressure distribution on surface and under the floor of a car (click to enlarge)

He describes that the process of model generation is more efficient with SC/Tetra when analyzing the entire car body as shown in Figure 1. During typical analysis, the model is usually created from CAD data, which is not designed for CFD simulations. Hence it takes long time to fill up bumps and gaps of a cowl. The surface wrapping function of SC/Tetra precedes the surface cleaning, contributing to reduce the time for preparation.

Mooncraft also worked on a thermo-fluid analysis of a radiator duct. “It is not suitable to evaluate cooling performance in wind tunnel. As for thermodynamic investigations, CFD is very useful.” said Mr. Sakaguchi.

Figure 2: Velocity distribution and temperature distribution in a radiator at normal cross section (click to enlarge)

The figure 2 is showing the result from this investigation. The radiator is mounted in front of the engine, the air coming from the upstream (on the left of the figure2) hits the radiator and flows out from the top (Figure2). A new louver was designed and installed to meet the regulation which prohibits radiator to be seen from the top.

However, it didn’t perform as it was expected, the cooling performance was not enough. The cooling capacity becomes more critical especially for races held in summer and a couple of louver designs were investigated in CFD as shown in Figure 2. The result shows that the louver design with appropriate curvature performs the best of these.

*All product and service names mentioned are registered trademarks or trademarks of their respective companies.
*Unauthorized use and reproduction of content, text, and images of this material is prohibited.
*Contents and specifications of products are as of April 30, 2017 and subject to change without notice. We shall not be held liable for any errors in figures and pictures, or any typographical errors in this brochure.

Company Details


Mooncraft Co. Ltd.
Established 1975
  • Design, R&D, and production of racing cars
  • Aerodynamic experiments and development using wind tunnel experiments
  • Rental of wind tunnel facility
President & CEO Takuya Yura
Location Gotenba-shi, Shizuoka, Japan



The article is also available in pdf.



Featured Software


General Purpose Unstructured Mesh Thermal-fluid Analysis System
More Details

Visitors also read


Yamaha Motor Co., Ltd.

MSC Cradle CFD Helps Yamaha Motor be Competitive in MotoGP Design Improvements of 0.01 Second Sought

  • SCRYU/Tetra
  • scFLOW

Hirata Corporation

Using scSTREAM to Evaluate Airflow in Production Facilities Improves the Technical Staff's Understanding and Enables More Effective Presentations to Clients


Honda R&D Co.,Ltd.

Deciding CFD Tool Based on Thorough Evaluation of Benchmark Model

  • SCRYU/Tetra

Misawa Homes Institute of Research and Development Co., Ltd.

Micro-climate Design that Fully Utilizes Wind and Sunlight Becomes Reality by Combining Conventional Solution Approaches with the Latest Computational Technology

  • SCRYU/Tetra


Contact us from the inquiry form below for any inquiry regarding this article.