Cradle

Contact

 
  1. TOP
  2. Download Center

Download Center

Product Guide

Corporate Brochure

Case Studies

ElectronicPartsMaker

To simulate composite parts such as a semiconductor package, detailed shape data is required in many cases.

 

With ElectronicPartsMaker, you can easily create detailed shape data of electronic parts and output the data as a library file for Preprocessor of scSTREAM and HeatDesigner.

 

You can create the following parts with ElectronicPartsMaker.

 

  • SOP(Small Outline Package)
  • QFP(Quad Flat Package)
  • PBGA(Plastic Ball Grid Array)
  • FCBGA(Flip Chip Ball Grid Array)
  • Power device packages
    • TO-220
    • TO-247
    • TO-252
    • TO-263
    • SOT-89
    • SOT-223

Download

ElectronicPartsMaker End User Agreement

By installing, copying, or otherwise using ElectronicPartsMaker, you agree to be bound by the terms of this END USER LICENSE AGREEMENT. If you do not agree to the terms of this END USER LICENSE AGREEMENT, you may not install or use ElectronicPartsMaker.


This END USER LICENSE AGREEMENT is a legal agreement between you (either an individual or a single entity) and Software Cradle Co., Ltd. for ElectronicPartsMaker which includes the computer software and may also include associated media, printed materials, and 'online' or electronic documentation.


Software Cradle Co., Ltd. grants you the non-exclusive license to use ElectronicPartsMaker during the terms of this END USER LICENSE AGREEMENT.

ElectronicPartsMaker is owned by Software Cradle Co., Ltd. ElectronicPartsMaker is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. ElectronicPartsMaker is licensed, not sold. Therefore, you must treat this software just like a book or any other copyrighted material (e.g., recordings or film).


Software Cradle Co., Ltd. makes no warranty, including but not limited to any implied warranties of merchantability or fitness for a particular purpose, regarding the software or accompanying materials. The software and accompanying materials are provided solely on an as-is basis.


In no event shall Software Cradle Co., Ltd. be liable to any special, collateral, incidental, or consequential damages in connection with or arising out of the purchase or use of the software and accompanying materials.


This agreement is governed by the laws of Japan.



16.3MB

* Make sure you save it into your PC before use.

ElectronicPartsMaker End User Agreement(pdf) 26.8KB

Function

Enter sizes of a part in [Property] dialog. You can check the entered sizes in the preview window. The window display can be switched per part.

  • Detailed model: The shapes of parts including the internal structure are created in detail as an assembly of blocks.
  • Simplified model: The lead flame is represented with one block in each direction.
  • Thermal circuit model: The shapes of parts are defined by thermal circuits without modeling the internal structure.

Notes

  • To use ElectronicPartsMaker, a redistributable package of Microsoft Visual C++ 2015 is required.
  • A library file output from ElectronicPartsMaker can only be read in Preprocessor of scSTREAM and HeatDesigner V14.
  • Depending on your PC environment, ElectronicPartsMaker may not work correctly or may work slowly.
  • ElectronicPartsMaker does not work on Apple Macintosh.
  • For others, refer to the license agreement of ElectronicPartsMaker (ElectronicPartsMaker End User Agreement [PDF file 26.8KB] )
  • To delete ElectronicPartsMaker, move the downloaded files to the recycle bin.

System Requirements

OS Windows® 7 (64bit)
Windows® 8.1 (64bit)
Windows® 10 (64bit)
Software Microsoft Visual C++® 2015 Update3 redistributable package
Others A graphic board supporting OpenGL is recommended.

CradleViewer

CradleViewer is a simple viewer for viewing simulation results from scSTREAM, scFLOW, SC/Tetra, and/or HeatDesigner.


Using CradleViewer, modeled objects can be turned, moved, expanded and reduced. The object can also be viewed by turning on and off the pre-set images/animation.

 

New function (version updated on November 09, 2018)

  • VR function is compliant with HTC VIVE

*Troubles may be caused on CradleViewer for iPad operatioin when showing results which exceeds 30 MB file size.

Download

CradleViewer End User Agreement

By installing, copying, or otherwise using CradleViewer, you agree to be bound by the terms of this END USER LICENSE AGREEMENT. If you do not agree to the terms of this END USER LICENSE AGREEMENT, you may not install or use CradleViewer.

This END USER LICENSE AGREEMENT is a legal agreement between you (either an individual or a single entity) and Software Cradle Co., Ltd. for CradleViewer which includes the computer software and may also include associated media, printed materials, and 'online' or electronic documentation.

Software Cradle Co., Ltd. grants you the non-exclusive license to use CradleViewer during the terms of this END USER LICENSE AGREEMENT.

CradleViewer is owned by Software Cradle Co., Ltd. CradleViewer is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. CradleViewer is licensed, not sold. Therefore, you must treat this software just like a book or any other copyrighted material (e.g., recordings or film).

Software Cradle Co., Ltd. makes no warranty, including but not limited to any implied warranties of merchantability or fitness for a particular purpose, regarding the software or accompanying materials. The software and accompanying materials are provided solely on an as-is basis.

In no event shall Software Cradle Co., Ltd. be liable to any special, collateral, incidental, or consequential damages in connection with or arising out of the purchase or use of the software and accompanying materials.

This agreement is governed by the laws of Japan.

 Updated:Version 20181018

CradleViewer.zip 13.1MB

End User Agreement for CradleViewer (pdf) 23.7KB

Sample files for CradleViewer

Sample File Examples

新宿のビル風

Airflow around buildings in Shinjuku

オフィス内熱解析(実物大)

Thermal simulation of office interiors (real scale)

オフィス内熱解析(1/10模型)

Thermal simulation of office interiors (1/10)

車室内微風

Vehicle interior ventilation

自動車の車体周り

Airflow around a car

電子機器筐体

Electronics Cooling

浴室内換気

Shower room ventilation

ボールバルブ

Ball valve

航空機周りの流れ

Airliner

車室内空調

Cabin climate control

局所換気装置

Ventilation equipment

シャトル

Shuttle

Attention

  • CradleViewer can only read a ".CradleViewer" file.
  • Operation may not work correctly depending on the PC environment.
  • May not be compatible with Apple Macintosh.
  • CradleViewer is a re-distribution free program. The specifications or configuration may change without a notice.
  • You may use CradleViewer based on End User Agreement (End User Agreement for CradleViewer [PDF file 23.7KB] )
  • To remove CradleViewer, simply delete the downloaded files to the trash bin.

Creating a file for CradleViewer (for an user)

  • All the displayed objects in the postprocessor will be output to a CradleViewer file. (Hidden objects will not be output)
  • CradleViewer is not compatible with a display methods with changing cycles (e.g. transient analysis).
  • Should you have a question regarding how to creating a CradleViewer file, please contact your support representative.

System Requirements

OS [Windows]
Windows® 7 (64bit)
Windows® 8.1 (64bit)
Windows® 10 (64bit)
Windows® Server 2008 R2 (64bit)
Windows® Server 2012 (64bit)
Windows® Server 2012 R2 (64bit)

[iPad]
iPad Pro (iOS 10)
Misc. An Open GL graphics card recommended
Input file CradleViewer file

Others

I do like CFD

A CFD guidebook written by Hiroaki Nishikawa (under the pseudonym of Katate Masatsuka), a scientist and author who has worked for NASA, is available to download.


Download

Contact

Catalog download

Send your inquiry