Top > Application Examples > Isuzu Motors Limited

Application Examples

Isuzu Motors Limited
Automatic Design Analysis for Engine Components utilizing VB Interface

Design engineers in engine design department of Isuzu Motors Limited (hereinafter, Isuzu) have used "SC/Tetra", a CFD (Computational Fluid Dynamics) tool developed by Software Cradle, since 2002. Now, they have taken one step further and started the automation of analyses and achieved the linkage to an optimization tool. All these accomplishments were brought about by means of "VB interface", which links SC/Tetra to "Visual Basic". We interviewed an Isuzu staff about how they actually promote the introduction of the design analysis tool.

Kiyoshi Shirato
Equipment design group 1
Engine equipment design division of Isuzu
Motors Limited

 

Click to enlarge

 Isuzu is one of the world's largest manufacturers of commercial vehicles and well-known for small trucks named "ELF", among others. The company has the world's leading technologies in Diesel engine for commercial vehicles. They provide engines for passenger cars, industrial equipment such as construction machinery, and marine vessels. The company's annual diesel engine production reaches over 0.9 million (fiscal year ending March, 2011).

 

 In the development of diesel engine, the company has to improve the fuel efficiency and output performance while satisfying emissions limit in the U.S, in Japan, or in Europe. Exhaust gas regulations have been tightened year after year, while the performance upgrade and cost reduction are required in the global competition. Under such strict requirements for development, the design engineers of the engine design department are now working on making their CFD analyses more efficient.

Outstanding Usability

 Isuzu started performing CFD analyses for the product development in 1986. They used "scSTREAM" developed by Software Cradle for aerodynamic design of vehicles and the flow analysis for engine compartments. For nearly 15 years, designing and CFD analysis had been separately conducted in different departments.

 

 Design engineers of the engine equipment design division started to perform thermo-fluid analysis in 2002. Kiyoshi Shirato of the equipment design group 1 of the engine equipment design division says, "At that time, increasing cost and time for engine parts experiments had been recognized as a problem. Meanwhile, performance demand had been getting stricter and we had been asked to reduce the development time, too. So we sought to solve these problems with the help of numerical analysis."

 

 Here, they chose "SC/Tetra" of Software Cradle as a thermo-fluid analysis tool. Mr. Shirato explains, "I first knew about SC/Tetra through the introduction from our central research institution. Compared to CFD tools of other companies, the usability of SC/Tetra was outstanding." The user interface of SC/Tetra was originally developed for Windows®, while other tools at the time were originally developed for UNIX® and converted for the use in Windows®. This allowed most design engineers, who were Windows® personal computer users, to easily handle the tool. Also, he says "The wizard function explaining the usage of the software for beginners was really useful, and the analysis accuracy was sufficiently high."

Click to enlarge

Developing Automation Tool in One Month

 Thanks to the usability, SC/Tetra had been widely used in the engine equipment design division. As the tool was used more often, the users began to request the reduction in preparatory works before analyses. Mr. Shirato points out "Repeating routine works for the analysis preparations becomes their psychological burden, causing operational errors." Furthermore, different engineers used different meshgrids so that analysis results were not consistent.

 

 Although they created a manual to deal with these requests or problems, they could not obtain significant turnarounds. Under such circumstances, "VB interface" was added to SC/Tetra version 6 in 2005, and it enabled users to control SC/Tetra by using external programs such as "Visual Basic®". Mr. Shirato says "Here, I started to think the possibility of automated analysis using this VB interface. As I had used Visual Basic® before, it didn't take me a long time to do programming for the automation tool. After verification using a design data for a simple duct, I was able to produce a fully-functioned tool in about a month." To deal with the problems caused by using different mesh grids by different users, he used "Mesh Adaptation Analysis" function of SC/Tetra. In addition, it only took him about one week to allow the automation tool for ducts to be utilized in other engine components such as air intakes and exhaust ports.

 In his engine equipment design division, introducing the automation tool enabled design engineers to obtain CFD analysis results of SC/Tetra by only clicking twice starting from a CAD tool with a design data loaded to it (see Fig.1). They easily cut the total analysis time (time for preparation, calculation, and evaluation) by about half compared to the time before introducing the automation tool.

 After the automation tool was introduced in the engine equipment department in 2005, SC/Tetra and the automation tool have been gradually established in other design departments through the relocations of engineers from the department. Mr. Shirato confidently says, "Currently, SC/Tetra and the automation tool are utilized in entire designing division for designing automobiles and power trains. Since SC/Tetra started supporting thermal stress analysis from version 8, opportunities for using the tool are expanded even more."

*All product and service names mentioned are registered trademarks or trademarks of their respective companies.
*Contents and specifications of products are as of May 15, 2012 and subject to change without notice. We shall not be held liable for any errors in figures and pictures, or any typographical errors.

Company Details




 

Isuzu Motors Limited
Foundation/Establishment 1916/April 1937
Major Products Heavy- medium- and light-duty trucks, buses, passenger vehicle engines, industrial-use diesel engines.
President and Representative Director Susumu Hosoi
Headquarters TOKYO
Capital 40.6 billion yen (March 2012)

Download

PDF

This article is also available in pdf.

Download/a>

Seminars

Featured Software

products

products
General Purpose Unstructured Mesh Thermal-fluid Analysis System
More Details

Visitors also read

photo

MIZUTANI ELECTRIC IND. CO., LTD

Specialty Manufacturer of Heat Sink Products Unique Application of Thermal Analysis Tool

  • STREAM
photo

Tokai University

Students Take the Lead in Simulating Solar Car Aerodynamics

  • SCRYU/Tetra
  • CADthru
photo

Murata Machinery, Ltd.

Fluid Analysis Software Helps Demonstrate Product Mechanism to Customers

  • SCRYU/Tetra
photo

Keihin Corporation

Performing Aerodynamic Noise Analyses to Meet Demands for Noise Reduction

  • SCRYU/Tetra

Inquiry

Contact us from the inquiry form below for any inquiry regarding this article.

製品に関するお問い合わせ

TOP